Wyoming Bentonite, API
Wyoming Bentonite is a 100% natural, very potent powder bentonite.Suitable for many applications such as drilling mud, bentonite membranes etc.
Wyoming bentonite. Powder, 25 kg bags. Pallet w/ 40 bags (1000 kg)
IDP-696 Bentonite viscosifier
IDP-696 viscosifier is an easy-to-mix, finely ground (200 mesh), specially selected sodium activated bentonite mixture.
Baro-Gel, 25kg bag
PAC-L filtration control additive
The PAC-L™ filtration control additive is used in most water-based drilling fluids including fresh water, sea-water, and brine up to 149°C. PAC-L filtration control additive has a very low impact on fluid rheology, is non-toxic and does not require a biocide. PAC-L filtration control additive exceeds the European specifications for low viscosity polyanionic .
Pac-L, bag 25kg
Staflo Regular PAC
The Staflo Regular PAC is a low molecular weight, polyanionic cellulose polymer of high purity. It is a primary fluid-loss reducer for water-based drilling fluids and also provides secondary viscosity.
Staflo Regular PAC, 25 kg bag
CMC Gabrosa P 300 G
CMC - Gabrosa P 300 G (Solquick) is a Carboxy Methyl Cellulose with a very high viscosity (4.000-8.000 mPa.s). It is easy-to-mix and immidiately increases viscosity of drilling fluid and offers filtration control. Can be used in both fresh and salt water.
CMC Gabrosa P 300 G, 25 kg bag. Pallet w/ 40 bags (1000 kg)
CMC Gabrosa EHV Tech
CMC - Gabrosa EHV Tech is a Carboxy Methyl Cellulose with high viscosity (1.200). It is easy-to-mix and immidiately increases viscosity of drilling fluid and offers filtration control. CMC EHV Tech provide perfect rheology control, good suspension and lubrication and prevent flocculation. Can be used in both fresh and salt water.
CMC Gabrosa EHV Tech, 25 kg bag. Pallet w/ 40 bags (1000 kg)
A63 liquid polymer
A63 is a fluid polymer, which immediately increases the viscosity. A63 can be poured directly in to a drilling hole.
A63 liquid polymer. 25 l container
Baryt OCMA is a Barium Sulphate for increasing density of the drilling fluid, e.g. in artesian wells. Density of min. 4,2 g/cm3.
Soda ash (pH-booster)
Soda ash (also known as pH-booster) increases the pH-value of the make-up water and helps to get maximum utilization of the bentonites viscosity in drilling fluids. Dosage app. 1-2½ kg/m3.
Soda ash, 25 kg bag. Pallet w/ 44 bags (1100 kg)
TUNNEL-GEL® PLUS viscosifier is a specially formulated, high-yield bentonite. It promotes rapid viscosity development while maintaining effective borehole stabilisation and enhanced filtration control in most water-based drilling fluids.
Tunnel-Gel Plus, 25kg bag
Nut shells, lost circulation material
Coarse nut shells 2-4mm immidiately limits loss of drilling fluid in water wells.
Nut shells 2-4mm, 25kg bag. 750 kg per pallet
N-Seal lost circulation material
N-SEAL acid soluble lost circulation material is specially formulated extrusion spun mineral fiber. Due to its solubility in weak acids, N-SEAL material is easily removed from the borehole. It can be used as an additive for loss of circulation in concentrations of up to 86 kg/m3.
N-Seal, 13,6kg bag.
AQUA-CLEAR is concentrated liquid polymer is a dispersant that provides superior mud and sediment removal from the producing formation and gravel pack.
Aqua-Clear PFD polymer, 25kg
Hexa Meta Phosphate
Solvent for drilling mud/ bentonites.
Hexa Meta Phosphate, 25 kg bag
Marsh funnel viscometer
The Marsh funnel test set is used for routine viscosity determinations in the field.
Marsh funnel viscometer. Complete set for determining density, viscosity, sand content and pH
Density weight for drilling fluids
Marsh funnel visometer
PH indikctor strips, pH 4,5-10