Stainless Steel screens
Screen for high water demands and the use in fine grained aquifers.
- Up to 50% open inlet area with coordinated gap widths
- Slot sizes from 0,1mm
- No blockage due to triangular shape of wire wrapping
- Easy and efficient regeneration of wells
- Installation depths > 3000 m are possible if designed accordingly
- Material: Stainless steel AISI304 or AISI 316L
- Available in lengths from 1 - 6 meters
| Dimension | Outer / Inner diameter (mm) | Wrapping basket loadbearing capacity in KN | Outer compressive strength* in bar |
| DN50 | 62/52 | 50 | 144,2 |
| DN80 | 90/80 | 72 | 63,9 |
| DN100 | 118/108 | 87 | 31,8 |
| DN125 | 143/133 | 108 | 18,7 |
| DN150 | 170/160 | 130 | 11,4 |
| DN200 | 223/211 | 151 | 8,7 |
| DN250 | 278/265 | 180 | 7,0 |
| DN300 | 305/292 | 216 | 5,3 |
| DN350 | 364/350 | 252 | 4,6 |
| DN400 | 410/394 | 288 | 4,6 |
* for gap width 0.5mm * applies at an inflow velocity of 3cm/s
All dimensions and values are for guidance only.
Available with push-fit flange or trapezoidal thread connections.
ZSM connection
